You will need to purchase a new X-Jet and never let someone borrow it again. Once someone uses an X-Jet, they love it and start washing everything in sight!

Products manufactured by X-Jet Technologies, Inc are warrantied for 90 days from date of shipment or purchase date from your distributor when properly installed, maintained, and operated in accordance with X-Jet Technologies instructions. In no event will X-Jet Technologies have a warranty obligation for normal wear and tear, or for products that have, at our determination, been subjected to accident, abuse, modification, improper installation, or improper maintenance including but not limited to corrosion due to not rinsing the parts after each use and improper storage causing damage. Shipping back to our facility for inspection is the responsibility of the customer. Contact the supplier you purchased from to obtain a Return Good Authorization (RGA). No material is accepted without the proper RGA (Return Goods Authorization). Equipment which proves to have a manufacturer’s defect upon our inspection will be repaired or replaced free of charge and returned to you via ground shipping. If it is determined the issue is NOT a manufacturer’s defect, return shipping will be the customer’s responsibility. Our liability ceases upon delivery to any common carrier. If special shipping such as Next Day Air or insured shipping are required, the customer will pay for such charges. X-Jet Technologies makes no warranties, expressed or implied, other than those included in this warranty statement, and assumes no liability in the cleaning or chemical application with X-Jet products as use and conditions are beyond our control.

As with most pressure washing equipment, rinsing the parts in fresh water after each use is ideal. For a more detailed description, check out this blog entry for cleaning and maintaining your investment. – We will link to future video to be created – check back soon!

Yes, The higher gallon machine you have the longer length of hose you can use with your X-Jet Nozzle. Most customers can add up to 40 ft of polybraid hose, however we have reports of up to 100 feet of hose being added with the 8 GPM + machines.

The X-Jet Nozzles must be used with a pressure washer to work properly, however the DS Twist can be used with the softwashing Agricultural systems. These types of low pressure direct pumps can be used with the 2-3 GPM size DS Twist.

Same X-Jet nozzle body, Yes but with modification. Remove the quick connect plug and inside you will find a spring and an orifice with a number stamped on it. Verify with the chart which size you need. Distributors who stock parts carry different size orifices and you can swap them out as needed when using different size machines.