Why will my neighbor/friend/relative not give me back my X-Jet they borrowed?
You will need to purchase a new X-Jet and never let someone borrow it again. Once someone uses an X-Jet, they Love it and and start washing everything in site!
What is the Warranty of an X-Jet?
Products manufactured by X-Jet Technologies, Inc are warrantied for 90 days from date of shipment or purchase date from your distributor when properly installed, maintained, and operated in accordance with X-Jet Technologies instructions. In no [...]
What is the maintenance on an X-Jet?
As with most pressure washing equipment, rinsing the parts in fresh water after each use is ideal. For a more detailed description, check out this blog entry for cleaning and maintaining your investment. - We [...]
Can I use the X-Jet with a longer hose than the 15ft included assembly?
Yes, The higher gallon machine you have the longer length of hose you can use with your X-Jet Nozzle. Most customers can add up to 40 ft of polybraid hose, however we have reports of [...]
Can I use the X-Jet and the DS Twist with a diaphragm or Agricultural type systems?
The X-Jet Nozzles must be used with a pressure washer to work properly, however the DS Twist can be used with the softwashing Agricultural systems. These types of low pressure direct pumps can be used [...]
What if I change my machine, can I still use the same X-Jet?
Same X-Jet nozzle body, Yes but with modification. Remove the quick connect plug and inside you will find a spring and an orifice with a number stamped on it. Verify with the chart which size [...]
Do I need to use the proportioners?
You do not have to use the proportioners but they sure make life easier when you do. Check out this link for more info soon.
Can I use an X-Jet to wash a roof?
Technically yes, we have many contractors that share they use an X-Jet to wash a roof. We would like to caution you when using chemicals at high concentrations to be aware of the potential for [...]
Where do I put the color coded proportioners?
The Proportioners are placed in the hose barb before attaching the 15ft hose assembly to the X-Jet Nozzle for both The Original X-Jet and the X-Jet M5.

