X-Jet Crash Course: Everything You Need to Know in 7 Minutes
Feb 24th 2026
If you’re new to X-Jet, the range can look more complicated than it really is.
Different nozzles. Different proportioners. Chemical hose. Reach. GPM. Close-range and long-range cleaning.
But once you understand how the system works, it’s actually pretty simple.
Here’s your X-Jet crash course.
What is an X-Jet?
X-Jet is an external chemical injection system designed for pressure washing professionals.
Instead of sending chemical through your pressure washer, pump or downstream injector, the chemical is introduced at the nozzle.
That means you can apply cleaning solution while helping keep harsh chemicals away from your pressure washing equipment.
The system is designed to give contractors a simple way to apply chemical from the ground, including on areas that would otherwise be difficult to reach.
How does it work?
The X-Jet system uses a chemical hose running from your cleaning solution to the nozzle.
As water passes through the X-Jet, the nozzle draws chemical through the hose and mixes it with the water stream.
Depending on the setup, you can control the strength of that mixture using the colour-coded proportioners supplied with the kit.
Different proportioners provide different water-to-chemical ratios, allowing you to adjust your mix for the job you’re tackling.
Why use the proportioners?
Not every surface needs the same chemical strength.
A heavily contaminated exterior may need a stronger mix than a straightforward maintenance clean.
That’s where the proportioners come in.
Rather than relying on one fixed dilution, you can select the proportioner that gives you the mix you need based on your machine’s flow rate.
Your X-Jet reference chart helps you match the colour-coded proportioner to your GPM and required dilution ratio.
It’s a small part of the kit, but it gives you much more control over how you clean.
What does the chemical hose do?
The chemical hose connects your cleaning solution directly to the X-Jet system.
Depending on the kit, the hose assembly can include:
- a screen filter and hose barb
- an in-line shut-off valve
- the chemical hose itself
The screen filter helps stop debris from entering the system, while the shut-off valve gives you a convenient way to control chemical flow.
X-Jet M5
The X-Jet M5 is the adjustable option.
Its adjustable nozzle lets you change the spray pattern without swapping between separate spray nozzles.
That makes it useful when you need to move between different areas of a property or change your spray pattern as you work.
The M5 is available in different versions based on pressure washer flow rate, so matching the nozzle to your machine’s GPM is important.
Depending on the machine specification and setup, the M5 can also give you significant reach from ground level.
X-Jet Original
The X-Jet Original uses dedicated nozzle options rather than the adjustable M5-style head.
It gives contractors both long-range capability and the option to work closer to the surface using the appropriate close-range setup.
That makes it useful when a job includes a mix of higher areas and tighter spaces such as:
- fencing
- hedges
- walls
- detailed exterior areas
Again, the key is choosing the correct X-Jet for your machine’s GPM.
DS Twist
DS Twist: Traditional Downstreaming, Made More Flexible
The DS Twist is designed for contractors who prefer a traditional downstream setup. It works with your existing downstream injector at the pressure washer, which draws chemical from your tank and mixes it into the water stream.
From there, the chemical and water travel together through your pressure hose and come out through the DS Twist as one stream, giving you a simple way to soap large areas without carrying a chemical pail around the property.
The DS Twist drops the operating pressure at the nozzle to activate the downstream injector, while its adjustable head lets you twist from a tight 0° stream for maximum reach to a wide 60° fan for closer cleaning.
Why contractors choose the DS Twist:
-
Uses your existing downstream injector and chemical tank
-
Chemical and water are combined into one stream through the pressure hose
-
Reach up to 60 feet, depending on your machine’s GPM
-
Adjust from a 0° stream to a 60° fan without changing tips
-
Apply soap and rinse using the same nozzle
-
No need to carry a separate 5-gallon chemical pail around the job
If you already downstream and want more control and reach without constantly swapping shooter tips, the DS Twist keeps the setup simple.
Why contractors use X-Jet
The real advantage of X-Jet isn’t simply that it sprays chemicals.
It’s the flexibility it gives you on site.
You can apply chemical externally, change dilution ratios, work at different distances and adapt the setup to the property you’re cleaning.
For contractors regularly working on houses, commercial buildings and other exterior surfaces, that can mean less time changing equipment and more control over the cleaning process.
Before you buy: know your GPM
This is one of the most important parts.
Choose your X-Jet based on your pressure washer’s GPM.
Using the correct model ensures the nozzle is matched to the water flow your machine produces.
Check your machine specification first, then select the corresponding X-Jet model.
And when you’re choosing a proportioner, use the supplied ratio chart alongside your machine’s GPM to determine the correct chemical dilution.
The X-Jet system in one minute
If you only remember a few things, remember these:
Water comes from your pressure washer.
Chemical comes through the separate chemical hose.
The two meet at the X-Jet nozzle.
Proportioners control your chemical dilution.
Your GPM determines which X-Jet setup you need.
That’s the basic X-Jet system.
Simple once you know how the pieces fit together.
Ready to find the right X-Jet?
Explore the X-Jet range and choose the nozzle and kit designed for your pressure washer and the type of work you do.